China wholesaler OEM Quality Driveshaft Auto Universal CV Joint Axle for CZPT CZPT CZPT CZPT Honda Mazda CZPT CZPT CZPT Daihatsu Suzuki FIAT Opel Peugeot Renault

Product Description

The function of the auto CV JOINT universal joint:
The inner cv joint is connected to the gearbox differential, and the outer ball cage is connected to the wheel. The function of the outer cv joint is the function of the outer cv joint, no matter it is power output or when the vehicle is turning.
What to pay attention to when using the car cv joint dust cover boot:
1. The cv joint plays an important role in the transmission system of the car. It can transmit power from the engine to the wheels, so the cv joint should be well lubricated and dust-proof. Once the cv joint dust cover boot is broken, it needs to be replaced in time. .
2. When there are regular abnormal noises when the car turns or bumps, you can check whether the dust cover boot of the car cv joint is broken, because the dust cover boot of the cv joint is broken, and it is easy for dust to enter and damage the cv joint.
3. If there is no problem with the dust cover boot of the car cv joint, you should go to the auto repair shop to check whether the cv joint is broken by a professional master. If the cv joint is broken, you need to replace it, and it is best to replace the cv joint dust cover boot .

What caused the cv joint to be damaged?
1. The dust cover boot is damaged
The service life of the cv joint is closely related to the dust cover. The dust cover boot can effectively protect the internal grease of the cv joint from being polluted by the outside and being lost to the outside. Once the dust cover is damaged, if it is not discovered by the car owner in time, it will cause the inside of the cv joint to be polluted by sand, stones and muddy water from the outside, and it will be damaged quickly.
2. Long-term wading into water
In some models, the small clips of the dust jackets are not tightened very strongly. It can meet the daily splash waterproof, but if the water is too deep for a long time, it is easy to cause water to enter the cv joint. It is not easy for the car owner to find out after the water enters, which will lead to wear and tear inside the cv joint.

HDAG brand CV JOINTS universal joint FEATURE:
1. Bell-shaped shell: CF53 ball cage special steel or 55# steel, after forging + normalizing treatment, good rigidity, high strength and wear resistance. HDAG adopts a double-arc four-point contact structure, which is the most ideal channel structure for the outer ball cage at present.
2. Inner wheel and cage: applied material of 20CrMnTi (gear steel) + carburizing (the carburizing layer is controlled at 0.6mm);Compared with 20Cr, 20CrMnTi has the advantages of strong hardenability and permeability.
3. CV JOINTS Grease: molybdenum disulfide lithium base grease, molybdenum disulfide has good lubricating properties and excellent wear resistance, the lithium base grease type added with MoS2 has a good effect on metal parts that are directly stamped and formed without grinding and deep processing Running function; high and low temperature can work normally at -30°C-120°C.
4. CV JOINTS Dust cover boot: Neoprene (polychloroprene) + nitrile rubber, with good oil and chemical resistance, flame resistance, CHINAMFG resistance, weather resistance (-40 ° C ~ 120 ° C), high tensile strength Tensile strength and other properties
5. Steel ball: adopt bearing steel GCr15
6. Inner CV JOINT universal joint bolts: 35CrMo or 40Cr+hot forging+quenching and tempering, the performance grade is 12.0, the hardness value HV385~435 (HRC39-44) is the same standard as the original OEM parts, the torsional strength is high

Product description
Driveshaft cv joint axle for CHINAMFG Lexus Infiniti Corolla Yaris RAV4 Prius Hiace Prado Pickup Matrix Wish Highlander LandCruiser Tacoma 4Runner Avensis Vios honda Accord CRV Odyssey Civic City CHINAMFG tiida latio versa CHINAMFG L2   SEMI EIXOL2   SEMI EIXO PAJERO 2.0 16V TR4 2   SEMI EIXO PAJERO 2.0 16V TR4 2002/2011 PAJERO IO 1.8 16V TR4 99/2001 MACHO/FEMEA AUTOM. C/ABS    SEMI EIXO VT9578           MR-276.869   PAJERO/L200 SPORT 2.5/2.8 2001/…   SEMI EIXO   KJH3114         3815A308 30X47X505 SEMI EIXO LD CHINAMFG PAJERO DAKAR 3.2 / 3.5 4X4 2571/
L200 TRITON C/ABS 08/   SEMI EIXO   KJH3115         3815A307 30X28X607 SEMI EIXO LE CHINAMFG PAJERO DAKAR 3.2 / 3.5 4X4 2571/
L200 TRITON C/ABS 08/   SEMI EIXO   KJH9545         CA260009   SEMI EIXO LE CHINAMFG PAJERO SPORT 2.8/3.0 1998/
L200 SPORT HPE C/ABS-03/07   SEMI EIXO   KJH9546         CA26571   SEMI EIXO LD CHINAMFG PAJERO SPORT 2.8/3.0 1998/
L200 SPORT HPE C/ABS-03/07   NISSAN       KJH3303 VT5477      NJH06-5191  C9211EL00B 25X23X49,10 NISSAN LIVINA 1.8 2571/       KJH3300     JHC29007   C92111HB0B 25X20X49,10 NISSAN MARCH  1.0 2011/   NI-1090   KJH3301 VT5228   JHC29004 NJH38-1011 C9211EL10A 25X22X49,10 NISSAN MARCH  1.6 2011/   NI-1052   KJH3304 VT5136     NJH41-T000 C9211ET571 29X24X56,25 NISSAN SENTRA 2.0 2007/       KJH3302 VT5380       C9211EL10D 25X22X49,10 NISSAN VERSA 1.6 2011/       KJH3306           29 X 25 FRONTIER   SEL 2.5 4X4 2008/…   NI-1043   KJH3307   AL-1082   NJH05-1082   28X27X50 NISSAN FRONTIER 2.8 2002 / 2007       KJH3309 VT5370       391003HC0B           KJH3310 VT5383      NJH49-5383  39100-3RZ0C           KJH3311 VT5545   JHC29003  NJH45-1011              KJH3314                 5710-D40B   KJH3316 VT5178   JHC29006 NJH31-1449 39100EB70C 29x36x67 NISSAN NP300 NAVARA (D40) 2.5 dCi    SEMI-EIXO    KJH3305         39100EB70C 29X27X648  SEMI-EIXO LD/LE FRONTIER SEL 2.5 4X4-08/   

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Condition: New
Color: Natural Color
Certification: CE, ISO
Car Model 6: Toyota Lada Mitsubishi Nissan Isuzu Honda Mazda
Car Model 1: for Hyundai KIA Daewoo Daihatsu Suzuki
Car Model 3: for FIAT Opel Peugeot Renault Citroen
Customization:
Available

|

Customized Request

universal joint

How do you properly maintain and lubricate a universal joint?

Maintaining and lubricating a universal joint is essential to ensure its smooth operation, extend its lifespan, and prevent premature failure. Here’s a detailed explanation of the proper maintenance and lubrication process:

To properly maintain and lubricate a universal joint, follow these steps:

  1. Consult Manufacturer Guidelines: Refer to the manufacturer’s guidelines and recommendations specific to the universal joint being used. Manufacturers often provide detailed instructions regarding maintenance intervals, lubrication types, and procedures. Familiarize yourself with these guidelines before performing any maintenance or lubrication.
  2. Inspect the Joint: Regularly inspect the universal joint for signs of wear, damage, or misalignment. Look for indications of excessive play, corrosion, fatigue, or any other abnormalities. Inspecting the joint allows you to identify potential issues before they escalate. If any problems are detected, address them promptly to prevent further damage or failure.
  3. Clean the Joint: Before applying lubrication, clean the universal joint to remove any dirt, debris, or old lubricant that may have accumulated. Use a suitable cleaning agent or solvent recommended by the manufacturer. It’s important to have a clean surface for effective lubrication.
  4. Select the Proper Lubricant: Choose the appropriate lubricant specified by the manufacturer. The type of lubricant required may vary based on factors such as the universal joint design, operating conditions, and temperature range. Common lubricants used for universal joints include grease or oil. Ensure that the selected lubricant is compatible with the joint’s materials and operating environment.
  5. Apply Lubricant: Apply the lubricant to the universal joint according to the manufacturer’s instructions. Pay attention to the specific lubrication points, such as the bearing caps, needle bearings, or trunnions. Use the recommended amount of lubricant to ensure proper coverage and distribution. Avoid over-lubrication as it can lead to excessive heat generation and increased friction.
  6. Operate the Joint: After lubrication, operate the universal joint to distribute the lubricant evenly and ensure it reaches all necessary components. Rotate or move the joint through its full range of motion several times to facilitate the spreading of the lubricant and to verify smooth operation. This step helps to eliminate any air pockets and ensures that all surfaces are adequately lubricated.
  7. Monitor and Reapply: Regularly monitor the universal joint’s performance and lubrication condition. Periodically check for any signs of lubricant breakdown, contamination, or leakage. Depending on the manufacturer’s recommendations, reapply lubrication at specified intervals or when necessary to maintain optimal operation. Factors such as operating conditions, load, and temperature may influence the frequency of lubrication.
  8. Keep Records: Maintain a record of the universal joint’s maintenance activities, including lubrication dates, lubricant type, and any observations made during inspections. These records can help establish a maintenance schedule, track the joint’s performance over time, and serve as a reference for future maintenance or troubleshooting.

By following these steps and adhering to the manufacturer’s guidelines, you can properly maintain and lubricate a universal joint, promoting its longevity, reliability, and optimal performance.

universal joint

How does a constant-velocity (CV) joint differ from a traditional universal joint?

A constant-velocity (CV) joint differs from a traditional universal joint in several ways. Here’s a detailed explanation:

A traditional universal joint (U-joint) and a constant-velocity (CV) joint are both used for transmitting torque between non-aligned or angularly displaced shafts. However, they have distinct design and operational differences:

  • Mechanism: The mechanism of torque transmission differs between a U-joint and a CV joint. In a U-joint, torque is transmitted through a set of intersecting shafts connected by a cross or yoke arrangement. The angular misalignment between the shafts causes variations in speed and velocity, resulting in fluctuating torque output. On the other hand, a CV joint uses a set of interconnected elements, typically ball bearings or roller bearings, to maintain a constant velocity and torque output, regardless of the angular displacement between the input and output shafts.
  • Smoothness and Efficiency: CV joints offer smoother torque transmission compared to U-joints. The constant velocity output of a CV joint eliminates speed fluctuations, reducing vibrations and allowing for more precise control and operation. This smoothness is particularly advantageous in applications where precise motion control and uniform power delivery are critical. Additionally, CV joints operate with higher efficiency as they minimize energy losses associated with speed variations and friction.
  • Angular Capability: While U-joints are capable of accommodating larger angular misalignments, CV joints have a limited angular capability. U-joints can handle significant angular displacements, making them suitable for applications with extreme misalignment. In contrast, CV joints are designed for smaller angular displacements and are typically used in applications where constant velocity is required, such as automotive drive shafts.
  • Operating Angles: CV joints can operate at larger operating angles without significant loss in torque or speed. This makes them well-suited for applications that require larger operating angles, such as front-wheel drive vehicles. U-joints, on the other hand, may experience speed fluctuations and reduced torque transmission capabilities at higher operating angles.
  • Complexity and Size: CV joints are generally more complex in design compared to U-joints. They consist of multiple components, including inner and outer races, balls or rollers, cages, and seals. This complexity often results in larger physical dimensions compared to U-joints. U-joints, with their simpler design, tend to be more compact and easier to install in tight spaces.

In summary, a constant-velocity (CV) joint differs from a traditional universal joint (U-joint) in terms of torque transmission mechanism, smoothness, efficiency, angular capability, operating angles, complexity, and size. CV joints provide constant velocity output, smoother operation, and higher efficiency, making them suitable for applications where precise motion control and uniform power delivery are essential. U-joints, with their ability to accommodate larger angular misalignments, are often preferred for applications with extreme misalignment requirements.

universal joint

How do you install a universal joint?

Installing a universal joint correctly is essential to ensure its proper functioning and longevity. Here are the general steps to guide you in the installation process:

  1. Prepare the universal joint: Before installation, inspect the universal joint for any damage or defects. Ensure that all the components, such as yokes, bearings, and cross, are in good condition. Clean the components if necessary and apply a suitable lubricant to ensure smooth operation.
  2. Align the shafts: Position the shafts that need to be connected by the universal joint. Align the shafts as closely as possible, ensuring that they are parallel and collinear. If precise alignment is challenging, universal joints can compensate for slight misalignments, but it is still preferable to have the shafts as aligned as possible.
  3. Insert the cross: Insert the cross-shaped center piece of the universal joint into one of the yokes. Ensure that the cross is aligned properly with the yoke and that the bearings are securely seated in the yoke bores.
  4. Attach the second yoke: Slide the second yoke onto the cross, aligning it with the opposite ends of the cross arms. Make sure the yoke is oriented in the correct phase with the first yoke, typically 90 degrees out of phase, allowing for angular displacement.
  5. Secure the yokes: Use the appropriate fastening method to secure the yokes to the shafts. This can include methods such as set screws, clamps, or retaining rings. Follow the manufacturer’s guidelines and torque specifications for the specific type of universal joint being installed.
  6. Check for smooth operation: After securing the yokes, rotate the connected shafts by hand to check for smooth operation and proper articulation. Ensure that the universal joint moves freely without binding or excessive play. If any issues are detected, double-check the alignment, lubrication, and fastening of the universal joint.
  7. Test under load: If applicable, test the universal joint under the expected load conditions of your application. Monitor its performance and check for any abnormal vibrations, noises, or excessive heat. If any issues arise, re-evaluate the installation and make necessary adjustments or consult with an expert.
  8. Maintenance and lubrication: Regularly inspect and maintain the universal joint as part of your overall system maintenance. Ensure that the joint remains properly lubricated according to the manufacturer’s recommendations. Lubrication helps reduce friction, wear, and heat generation, extending the life of the universal joint.

It’s important to note that the installation process may vary depending on the specific type and design of the universal joint, as well as the application requirements. Always refer to the manufacturer’s instructions and guidelines for the particular universal joint you are installing, as they may provide specific procedures and considerations.

China wholesaler OEM Quality Driveshaft Auto Universal CV Joint Axle for CZPT CZPT CZPT CZPT Honda Mazda CZPT CZPT CZPT Daihatsu Suzuki FIAT Opel Peugeot Renault  China wholesaler OEM Quality Driveshaft Auto Universal CV Joint Axle for CZPT CZPT CZPT CZPT Honda Mazda CZPT CZPT CZPT Daihatsu Suzuki FIAT Opel Peugeot Renault
editor by CX 2024-02-05

Recent Posts