China Professional Universal Floating Flange Double Ball Rubber Expansion Joint Ruixuan

Product Description

Product Description

 

 

       Double ball rubber joint can be divided into single ball, double ball, different diameter body, curved ball and wind pressure coil. A tubular rubber piece consisting of an inner and outer rubber layer, a cord layer and a traveller is vulcanized and formed and then loosely combined with a metal flange or a parallel joint.

 

Product Parameters

 

Double sphere rubber bellows coupling is generally consist of the inner and the outer rubber layer and fabric reinforced layer (the enhancement layer has a multilayer spreading cord fabric), vulcanization molded in high temperature and high pressure , then assembly together with rubber tube and metal flange or parallel joint sleeve.

 

No.    Name                                           Material

1    Inner and outer rubber             NR,NBR,EPDM etc

2    Frame                                     Nylon cord fabric

3    Pressuring ring                        Steel wire

4    Flange                                    Stainless steel or Carbon steel                                                                    galvanized
 

 

Nominal diameter DN Length
mm
Center diameter
of    the bolt
bolt hole diameter  bolt   quantity               Axial displacement Horizontal
displacement
(mm)
Deflexion angle
mm inch Extension(mm) Compression(mm) (a1+a2)°
50 2 165 125 18 4 30 50 45 35°
65 2 ½ 175 145 18 4 30 50 45 35°
80 3 175 160 18 8 35 50 45 35°
100 4 225 180 18 8 35 50 40 35°
125 5 230 210 18 8 35 50 40 35°
150 6 325 240 22 8 35 50 40 35°
200 8 325 295 22 8 35 50 40 35°
250 10 325 350 22 12 35 60 35 30°
300 12 325 400 22 12 35 60 35 30°

Technical Conditions
 

 

                  DN200-DN300(8-12)           DN50-DN150(2-6)
       JGD-A(1)                                   JGD-A(2)                         JGD-A(3)
workiing pressure
  MPa
          1(10)              1.6(16)                   2.5(25)
burst pressure
   MPa
          2(20)              3(30)                   4.5(45)
vacuum  degree
  KPa
        40(300)            53.3(400)                 86.7(650)
  applicable      temperature            -15~115ºC  specially  reachable  -30~250ºC  

applicable medium

 

            “Air,water,sea water,vacuum,hot water,oil,acid,alkali,etc.”        

Data above is only for reference, if  you want much more information, please contact us.

We have various types of molds and multiple sets rubber vulcanizing equipment, which can meet mass production and customization requirements.
 

Production process

 

 
 

products application

 

 This product is widely used in chemical industry, construction, water supply and drainage, petroleum, heavy and light industry, refrigeration, sanitation, plumbing, fire protection, electric power and other basic engineering.According to different materials can be made of acid resistance, alkali resistance, corrosion resistance, oil resistance, high temperature resistance, radiation resistance, wear resistance, aging resistance and other varieties, to adapt to a variety of media and the environment.We can also do pressure testing.

 

Company Profile

 

         HangZhou Ruixuan pipeline equipment factory was founded in 1996.It  is an excellent  enterprise  specializing  in manufacturing  and selling pipe fittings.It’s located  in Xicun village ,HangZhou  city,ZheJiang province ,the concentrated  area  of pipeline equipment industry  in China.The  company factory  is located  in Xicun town pipeline equipment industrial park.It covered an area of20000  square  meters.

         At present, the company has the production capacity of pipeline equipment with a maximum diameter of 4000mm, and its main products are: Steel expansion joint, flexible waterproof sleeve, large diameter flange, double flange force transfer expansion joint, large deflection loose sleeve compensation joint, spherical compensation joint, sleeve compensator, bellows compensator, non-metallic compensator, rubber expansion joint, DC medium no thrust sleeve compensator, flexible expansion pipe and other pipeline equipment. The annual production capacity is 30 million sets.

       The flexible telescopic pipe equipment is mainly used in the pipeline crossing different geological structures under different conditions and the application of pipe installation drop, reduce or avoid the impact of geological settlement and crustal activity on the pipeline, so that the construction unit can save more than 50% of the cost when purchasing the equipment. The rubber expansion joint series products of the company, the maximum production diameter of 3600mm, have been applied in millions of units of thermal power projects in China for many times, and have been praised by the users.

        The company passed ISO9001:2008 quality management system certification in 2009 and ISO14000:2004 environmental management system certification in 2009. The company has a strict quality control system, standard production process, standard factory inspection hand section, to ensure that every product meets the national standards and customer requirements.
 
       Business philosophy: responsible production of products, return the trust of customers; To build a community with a sense of belonging and appreciate employees’ contributions; Make a contribution to the society of enterprises, give back to the good times. HangZhou Ruixuan pipeline equipment factory is willing to work with friends from all walks of life hand in hand, mutual support, create a better future!

 

Certifications

 

FAQ

 

Q : Are you trading company or manufacturer?
A: We are manufacturer of rubber expansion joint,bellow, dismantling joint, dresser coupling, flange adapter and flange with more than 13-year experience.

Q: Do you have products catalog?
A: Yes, we have. Please tell me your email or instant messager, we will send our catalog.

Q: Can you provide drawings and technical data?
A: Yes, our professional technical department will design and provide drawings and technical data.

Q: Do you provide samples? Is it free or charged?
A: Yes, we can offer sample free but shipping charges covered by customer.

Q: How long is your delivery time?
A: Depends on QTY, but normally no more than 20 working days.

Q: Can the products be manufactuered by customer’s requirement?
A: Yes, the specifications stated above are the standard ones, we can design and manufacture as requirement. 

Q: Visting factory is allowed or not?
A: Yes, we welcome customers visiting our factory. Our factory is located HangZhou city,ZheJiang province,China mainland

  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Brand Name: Ruixuan
Model Number: Rej200
Technics: Forged
Samples:
US$ 8/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

universal joint

Can universal joints be used in aerospace and aviation applications?

Yes, universal joints can be used in aerospace and aviation applications, albeit their usage is limited and specific to certain systems. Here’s a detailed explanation:

Aerospace and aviation industries often require precise and reliable mechanical systems to ensure the safe and efficient operation of various components and subsystems. While universal joints are widely used in many industries, their application in aerospace and aviation is more limited due to the stringent requirements and specific conditions of these fields.

Here are some key points to consider regarding the use of universal joints in aerospace and aviation applications:

  1. Control Systems: Universal joints can be employed in control systems within aircraft and spacecraft. These control systems involve the transmission of motion and rotation between different components or surfaces. Universal joints can provide flexibility and enable the adjustment of control surfaces such as rudders, ailerons, or flaps, allowing for precise control of the aircraft’s movement.
  2. Instrumentation and Testing: Universal joints can be utilized in instrumentation and testing equipment used in aerospace and aviation. These applications often require the transmission of rotational motion and torque to various sensors, actuators, or measuring devices. Universal joints can facilitate the required motion transfer while compensating for misalignment or angular variations, ensuring accurate data acquisition and reliable testing results.
  3. Spacecraft Deployment Mechanisms: In space exploration missions, universal joints can be employed in deployment mechanisms. These mechanisms are responsible for deploying antennas, solar panels, or other components of spacecraft once they reach their destination. Universal joints can accommodate the complex motion and alignment requirements during the deployment process, ensuring smooth and controlled extension of these critical components.
  4. Engine Accessories: Universal joints can be utilized in certain engine accessories or auxiliary systems in aerospace and aviation. These may include fuel pumps, generators, or hydraulic systems. Universal joints can transmit rotational motion and torque from the engine to these accessories, allowing them to operate efficiently and reliably.
  5. Cautions and Limitations: The usage of universal joints in aerospace and aviation applications requires careful consideration of factors such as weight, space constraints, reliability, and safety. These industries have strict regulations and standards to ensure the highest levels of performance and safety. Therefore, the selection, integration, and testing of universal joints must be performed in accordance with the specific requirements and guidelines provided by the regulatory authorities and industry best practices.

In summary, while universal joints have limited application in aerospace and aviation, they can be utilized in control systems, instrumentation and testing, spacecraft deployment mechanisms, and engine accessories. Careful consideration of the specific requirements, regulations, and safety standards is essential when incorporating universal joints into aerospace and aviation systems to ensure optimal performance and reliability.

universal joint

Can universal joints be used in agricultural equipment?

Yes, universal joints can be used in agricultural equipment. Here’s a detailed explanation:

Universal joints are commonly employed in various types of agricultural equipment and machinery. They offer several advantages that make them suitable for agricultural applications. Here are some key points to consider:

  • Torque Transmission: Agricultural equipment often requires the transmission of high torque levels to perform tasks such as plowing, tilling, harvesting, or powering other implements. Universal joints are capable of transmitting significant amounts of torque, making them suitable for handling the power requirements of agricultural machinery.
  • Flexibility: Agricultural equipment frequently operates in uneven terrain or encounters obstacles that can cause angular misalignment between the driving and driven components. Universal joints can accommodate such misalignment and transmit torque even when the shafts are not perfectly aligned. This flexibility allows agricultural machinery to navigate uneven surfaces and maintain power transfer.
  • Durability: Universal joints can be constructed from materials that provide high strength and durability, such as alloy steels. Agricultural equipment often operates in demanding conditions, including exposure to dust, moisture, and vibrations. Robust universal joints can withstand these harsh environments and repetitive motions, ensuring reliable performance and longevity.
  • Cost-Effectiveness: Universal joints offer a cost-effective solution for torque transmission in agricultural equipment. Compared to alternative power transmission methods, such as complex gear systems or hydraulic drives, universal joints can provide a more economical option while still delivering adequate performance and reliability.
  • Wide Application Range: Universal joints can be used in various agricultural equipment, including tractors, combine harvesters, balers, seeders, sprayers, and more. They are versatile components that can be integrated into different systems and configurations, allowing for efficient power transmission in a wide range of agricultural applications.

It’s important to note that the specific design and selection of universal joints for agricultural equipment should consider factors such as the torque requirements, operating conditions, maintenance practices, and safety considerations. Proper sizing, lubrication, and regular inspections are crucial for ensuring optimal performance and preventing premature wear or failure.

In summary, universal joints can indeed be used in agricultural equipment. Their torque transmission capabilities, flexibility, durability, cost-effectiveness, and versatility make them a suitable choice for power transmission in various agricultural machinery and equipment.

universal joint

How do you maintain and service a universal joint?

Maintaining and servicing a universal joint is essential to ensure its optimal performance, longevity, and reliability. Regular maintenance helps identify and address any potential issues before they lead to significant problems. Here are some guidelines for maintaining and servicing a universal joint:

  • Regular inspection: Perform regular visual inspections of the universal joint to check for signs of wear, damage, or misalignment. Look for any loose or missing fasteners, excessive play, or abnormal noise during operation. Inspect the lubrication condition and ensure it is adequate.
  • Lubrication: Proper lubrication is crucial for the smooth operation of a universal joint. Follow the manufacturer’s recommendations for lubrication type, quantity, and intervals. Regularly inspect the lubrication condition and replenish or replace the lubricant as necessary. Ensure that the lubrication points are accessible and apply the lubricant directly to those points.
  • Torque specifications: When performing maintenance or service tasks that involve fasteners or connections, adhere to the manufacturer’s torque specifications. Over-tightening or under-tightening can lead to issues such as stress concentration, fatigue, or premature failure of the universal joint.
  • Alignment: Ensure that the connected shafts are properly aligned. Misalignment can cause excessive stress and wear on the universal joint components. If misalignment is detected, take appropriate measures to correct it, such as adjusting the shafts or using shims or spacers.
  • Fasteners: Regularly inspect and tighten all fasteners, including bolts, nuts, and retaining clips. Check for any signs of corrosion, damage, or wear on the fasteners. Replace any damaged or worn fasteners with suitable replacements according to the manufacturer’s specifications.
  • Seals and boots: If your universal joint has seals or boots, inspect them for damage or deterioration. Damaged seals or boots can lead to contamination or loss of lubricant, affecting the performance and lifespan of the joint. Replace any damaged or worn seals or boots promptly.
  • Operational monitoring: During operation, monitor the universal joint for any abnormal vibrations, noises, or temperature changes. Unusual vibrations or noises can indicate misalignment, wear, or other issues. Excessive heat can be a sign of insufficient lubrication or excessive friction. If any abnormalities are observed, investigate and address them promptly.
  • Service intervals: Follow the recommended service intervals provided by the manufacturer. These intervals may include tasks such as lubrication, inspection, re-greasing, or complete disassembly and reassembly. Adhering to the recommended service intervals helps maintain the optimal performance and reliability of the universal joint.
  • Expert assistance: If you encounter complex issues or are unsure about any maintenance or service tasks, seek assistance from a qualified professional or the manufacturer. They can provide specific guidance, troubleshooting, or perform more in-depth servicing if needed.

Proper maintenance and servicing of a universal joint contribute to its longevity, performance, and overall system reliability. By regularly inspecting the joint, ensuring proper lubrication, alignment, and fastening, and addressing any issues promptly, you can maximize the lifespan and efficiency of the universal joint in your mechanical system.

China Professional Universal Floating Flange Double Ball Rubber Expansion Joint Ruixuan  China Professional Universal Floating Flange Double Ball Rubber Expansion Joint Ruixuan
editor by CX 2024-02-16

Recent Posts