China Custom OEM Quality Driveshaft Auto Universal CV Joint Axle for CZPT CZPT CZPT CZPT Honda Mazda CZPT CZPT CZPT Daihatsu Suzuki FIAT Opel Peugeot Renault

Product Description

The function of the auto CV JOINT universal joint:
The inner cv joint is connected to the gearbox differential, and the outer ball cage is connected to the wheel. The function of the outer cv joint is the function of the outer cv joint, no matter it is power output or when the vehicle is turning.
What to pay attention to when using the car cv joint dust cover boot:
1. The cv joint plays an important role in the transmission system of the car. It can transmit power from the engine to the wheels, so the cv joint should be well lubricated and dust-proof. Once the cv joint dust cover boot is broken, it needs to be replaced in time. .
2. When there are regular abnormal noises when the car turns or bumps, you can check whether the dust cover boot of the car cv joint is broken, because the dust cover boot of the cv joint is broken, and it is easy for dust to enter and damage the cv joint.
3. If there is no problem with the dust cover boot of the car cv joint, you should go to the auto repair shop to check whether the cv joint is broken by a professional master. If the cv joint is broken, you need to replace it, and it is best to replace the cv joint dust cover boot .

What caused the cv joint to be damaged?
1. The dust cover boot is damaged
The service life of the cv joint is closely related to the dust cover. The dust cover boot can effectively protect the internal grease of the cv joint from being polluted by the outside and being lost to the outside. Once the dust cover is damaged, if it is not discovered by the car owner in time, it will cause the inside of the cv joint to be polluted by sand, stones and muddy water from the outside, and it will be damaged quickly.
2. Long-term wading into water
In some models, the small clips of the dust jackets are not tightened very strongly. It can meet the daily splash waterproof, but if the water is too deep for a long time, it is easy to cause water to enter the cv joint. It is not easy for the car owner to find out after the water enters, which will lead to wear and tear inside the cv joint.

HDAG brand CV JOINTS universal joint FEATURE:
1. Bell-shaped shell: CF53 ball cage special steel or 55# steel, after forging + normalizing treatment, good rigidity, high strength and wear resistance. HDAG adopts a double-arc four-point contact structure, which is the most ideal channel structure for the outer ball cage at present.
2. Inner wheel and cage: applied material of 20CrMnTi (gear steel) + carburizing (the carburizing layer is controlled at 0.6mm);Compared with 20Cr, 20CrMnTi has the advantages of strong hardenability and permeability.
3. CV JOINTS Grease: molybdenum disulfide lithium base grease, molybdenum disulfide has good lubricating properties and excellent wear resistance, the lithium base grease type added with MoS2 has a good effect on metal parts that are directly stamped and formed without grinding and deep processing Running function; high and low temperature can work normally at -30°C-120°C.
4. CV JOINTS Dust cover boot: Neoprene (polychloroprene) + nitrile rubber, with good oil and chemical resistance, flame resistance, CHINAMFG resistance, weather resistance (-40 ° C ~ 120 ° C), high tensile strength Tensile strength and other properties
5. Steel ball: adopt bearing steel GCr15
6. Inner CV JOINT universal joint bolts: 35CrMo or 40Cr+hot forging+quenching and tempering, the performance grade is 12.0, the hardness value HV385~435 (HRC39-44) is the same standard as the original OEM parts, the torsional strength is high

Product description
Driveshaft cv joint axle for CHINAMFG Lexus Infiniti Corolla Yaris RAV4 Prius Hiace Prado Pickup Matrix Wish Highlander LandCruiser Tacoma 4Runner Avensis Vios honda Accord CRV Odyssey Civic City CHINAMFG tiida latio versa CHINAMFG L2   SEMI EIXOL2   SEMI EIXO PAJERO 2.0 16V TR4 2   SEMI EIXO PAJERO 2.0 16V TR4 2002/2011 PAJERO IO 1.8 16V TR4 99/2001 MACHO/FEMEA AUTOM. C/ABS    SEMI EIXO VT9578           MR-276.869   PAJERO/L200 SPORT 2.5/2.8 2001/…   SEMI EIXO   KJH3114         3815A308 30X47X505 SEMI EIXO LD CHINAMFG PAJERO DAKAR 3.2 / 3.5 4X4 2571/
L200 TRITON C/ABS 08/   SEMI EIXO   KJH3115         3815A307 30X28X607 SEMI EIXO LE CHINAMFG PAJERO DAKAR 3.2 / 3.5 4X4 2571/
L200 TRITON C/ABS 08/   SEMI EIXO   KJH9545         CA260009   SEMI EIXO LE CHINAMFG PAJERO SPORT 2.8/3.0 1998/
L200 SPORT HPE C/ABS-03/07   SEMI EIXO   KJH9546         CA26571   SEMI EIXO LD CHINAMFG PAJERO SPORT 2.8/3.0 1998/
L200 SPORT HPE C/ABS-03/07   NISSAN       KJH3303 VT5477      NJH06-5191  C9211EL00B 25X23X49,10 NISSAN LIVINA 1.8 2571/       KJH3300     JHC29007   C92111HB0B 25X20X49,10 NISSAN MARCH  1.0 2011/   NI-1090   KJH3301 VT5228   JHC29004 NJH38-1011 C9211EL10A 25X22X49,10 NISSAN MARCH  1.6 2011/   NI-1052   KJH3304 VT5136     NJH41-T000 C9211ET571 29X24X56,25 NISSAN SENTRA 2.0 2007/       KJH3302 VT5380       C9211EL10D 25X22X49,10 NISSAN VERSA 1.6 2011/       KJH3306           29 X 25 FRONTIER   SEL 2.5 4X4 2008/…   NI-1043   KJH3307   AL-1082   NJH05-1082   28X27X50 NISSAN FRONTIER 2.8 2002 / 2007       KJH3309 VT5370       391003HC0B           KJH3310 VT5383      NJH49-5383  39100-3RZ0C           KJH3311 VT5545   JHC29003  NJH45-1011              KJH3314                 5710-D40B   KJH3316 VT5178   JHC29006 NJH31-1449 39100EB70C 29x36x67 NISSAN NP300 NAVARA (D40) 2.5 dCi    SEMI-EIXO    KJH3305         39100EB70C 29X27X648  SEMI-EIXO LD/LE FRONTIER SEL 2.5 4X4-08/   

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Condition: New
Color: Natural Color
Certification: CE, ISO
Car Model 6: Toyota Lada Mitsubishi Nissan Isuzu Honda Mazda
Car Model 1: for Hyundai KIA Daewoo Daihatsu Suzuki
Car Model 3: for FIAT Opel Peugeot Renault Citroen
Customization:
Available

|

Customized Request

universal joint

How do you calculate the torque capacity of a universal joint?

Calculating the torque capacity of a universal joint involves considering various factors such as the joint’s design, material properties, and operating conditions. Here’s a detailed explanation:

The torque capacity of a universal joint is determined by several key parameters:

  1. Maximum Allowable Angle: The maximum allowable angle, often referred to as the “operating angle,” is the maximum angle at which the universal joint can operate without compromising its performance and integrity. It is typically specified by the manufacturer and depends on the joint’s design and construction.
  2. Design Factor: The design factor accounts for safety margins and variations in load conditions. It is a dimensionless factor typically ranging from 1.5 to 2.0, and it is multiplied by the calculated torque to ensure the joint can handle occasional peak loads or unexpected variations.
  3. Material Properties: The material properties of the universal joint’s components, such as the yokes, cross, and bearings, play a crucial role in determining its torque capacity. Factors such as the yield strength, ultimate tensile strength, and fatigue strength of the materials are considered in the calculations.
  4. Equivalent Torque: The equivalent torque is the torque value that represents the combined effect of the applied torque and the misalignment angle. It is calculated by multiplying the applied torque by a factor that accounts for the misalignment angle and the joint’s design characteristics. This factor is often provided in manufacturer specifications or can be determined through empirical testing.
  5. Torque Calculation: To calculate the torque capacity of a universal joint, the following formula can be used:
    Torque Capacity = (Equivalent Torque × Design Factor) / Safety Factor

    The safety factor is an additional multiplier applied to ensure a conservative and reliable design. The value of the safety factor depends on the specific application and industry standards but is typically in the range of 1.5 to 2.0.

It is important to note that calculating the torque capacity of a universal joint involves complex engineering considerations, and it is recommended to consult manufacturer specifications, guidelines, or engineering experts with experience in universal joint design for accurate and reliable calculations.

In summary, the torque capacity of a universal joint is calculated by considering the maximum allowable angle, applying a design factor, accounting for material properties, determining the equivalent torque, and applying a safety factor. Proper torque capacity calculations ensure that the universal joint can reliably handle the expected loads and misalignments in its intended application.

universal joint

What materials are commonly used in the construction of universal joints?

Universal joints are constructed using various materials that provide strength, durability, and resistance to wear and fatigue. Here’s a detailed explanation:

The choice of materials for universal joints depends on factors such as the application, load requirements, operating conditions, and cost considerations. Here are some commonly used materials:

  • Steel: Steel is one of the most common materials used in universal joint construction. Alloy steels, such as 4140 or 4340, are often employed due to their high strength, toughness, and resistance to wear and fatigue. Steel universal joints can withstand heavy loads and harsh operating conditions, making them suitable for various industrial applications.
  • Stainless Steel: Stainless steel is chosen for universal joints when corrosion resistance is a critical requirement. Stainless steel alloys, such as 304 or 316, offer excellent resistance to rust, oxidation, and chemical corrosion. These joints are commonly used in applications where exposure to moisture, chemicals, or harsh environments is expected.
  • Cast Iron: Cast iron is occasionally used in universal joints, particularly in older or specialized applications. Cast iron provides good strength and wear resistance, but it is generally heavier and less flexible than steel. It may be used in specific situations where its properties are advantageous, such as in large industrial machinery.
  • Aluminum: Aluminum universal joints are utilized when weight reduction is a priority. Aluminum alloys offer a good balance of strength and lightweight properties. These joints are commonly found in applications where weight savings are crucial, such as aerospace, automotive, or robotics.
  • Bronze: Bronze is sometimes used for bearings or bushings within universal joints. Bronze alloys provide good wear resistance, low friction, and the ability to withstand high temperatures. They are often employed in applications where self-lubricating properties and resistance to galling are required. Bronze bearings can be found in universal joints used in heavy machinery, marine equipment, or agricultural machinery.

It’s worth noting that the specific choice of materials may vary depending on the manufacturer, application requirements, and industry standards. Different combinations of materials may also be used for different components within a universal joint, such as the yokes, crosses, bearings, or seals, to optimize performance and durability.

In summary, universal joints are commonly constructed using materials such as steel, stainless steel, cast iron, aluminum, and bronze. The selection of materials depends on factors like strength, durability, wear resistance, corrosion resistance, weight considerations, and specific application requirements.

universal joint

What industries commonly use universal joints?

Universal joints, also known as U-joints, are utilized in various industries where the transmission of rotary motion between misaligned shafts is required. Here are some of the industries that commonly use universal joints:

  • Automotive: The automotive industry extensively employs universal joints in vehicles. Universal joints are essential components in drivelines, connecting the transmission to the drive shaft and allowing power to be transmitted to the wheels. They accommodate the misalignment caused by the suspension system and enable smooth power transfer.
  • Industrial Manufacturing: Universal joints find widespread use in industrial manufacturing applications. They are employed in machinery and equipment such as conveyors, mixers, pumps, printing presses, and machine tools. Universal joints facilitate the transmission of motion at angles, enabling efficient operation and flexibility in various manufacturing processes.
  • Aerospace: The aerospace industry utilizes universal joints in aircraft and spacecraft systems. They are used in control mechanisms for movable surfaces such as wings, flaps, and rudders. Universal joints enable the transfer of motion and control inputs between different components, ensuring precise and reliable operation of aerospace systems.
  • Marine: Universal joints are commonly employed in the marine industry for various applications. They are used in propulsion systems to transmit power from the engine to the propeller shaft. Universal joints also find application in steering systems, allowing for the transfer of motion between the steering wheel and the rudder or outboard motor.
  • Agriculture: The agricultural industry relies on universal joints in various machinery and equipment used in farming operations. Tractors, combines, harvesters, and other agricultural machinery utilize universal joints to transmit power between different components, accommodating misalignment caused by the terrain and articulation requirements.
  • Construction and Heavy Equipment: Universal joints are commonly found in construction and heavy equipment. They are used in machinery such as cranes, excavators, loaders, and concrete mixers. Universal joints enable the transmission of power and motion between different parts of the equipment, accommodating misalignment and articulation required in construction and heavy-duty operations.
  • Railway: The railway industry relies on universal joints for various applications. They are used in drivetrain systems to transmit motion between different components, such as the engine, gearbox, and axles. Universal joints allow for smooth power transfer while accommodating the misalignment caused by the movement and suspension of trains.
  • Robotics and Automation: Universal joints are utilized in robotics and automation systems. They enable the transmission of motion between misaligned components in robotic arms, manipulators, and other automated systems. Universal joints provide flexibility and precise movement, allowing for efficient operation of robotic and automated processes.

These are just a few examples of the industries that commonly use universal joints. Their ability to transmit rotary motion between misaligned shafts makes them essential components in a wide range of applications, enabling efficient and reliable operation across various industries.

China Custom OEM Quality Driveshaft Auto Universal CV Joint Axle for CZPT CZPT CZPT CZPT Honda Mazda CZPT CZPT CZPT Daihatsu Suzuki FIAT Opel Peugeot Renault  China Custom OEM Quality Driveshaft Auto Universal CV Joint Axle for CZPT CZPT CZPT CZPT Honda Mazda CZPT CZPT CZPT Daihatsu Suzuki FIAT Opel Peugeot Renault
editor by CX 2024-04-09

Recent Posts